Canon DC50 지침 매뉴얼

 Connecting to a Computer

If you selected the camcorder itself as 
the “Device to write to”, after the 
camcorder finishes reading the 
original disc, remove it and insert a 
brand new DVD-R or DVD-RW disc 
into the camcorder.

The copied disc will be finalized and 
automatically ejected from the drive.

IMPORTANT

 

To make a copy of a disc recorded in VR 

mode, be certain to insert a DVD-RW disc into 
the computer’s DVD drive.
 

The software does not support writing on 

DVD-R DL discs.
 

Always use a brand new disc as the target 

disc in the computer’s DVD drive or the 
camcorder. 
 

If you are using a computer’s DVD drive to 

make the backup copy you can also use a fully 
erased DVD-RW disc. To fully erase a DVD-RW 
disc you will need DVD authoring software.
 

When you are using a DVD-RW disc as the 

source disc, if the tray of a DVD drive other than 
that selected in step 5 opens when you need to 
insert the target disc, some recordings on the 
source disc may be lost. Click on “Cancel” and 
restart the computer.

Transferring Still Images - Direct 

Transfer

With the supplied USB cable and Digital 
Video Software you can transfer still 
images to a computer. With the 

 

you can do so simply by pressing 

.

Preparations
The first time you connect the camcorder 
to the computer, you need to install the 
software and set the auto-launch setting. 
From the second time on, you will only 

need to connect the camcorder to the 
computer to transfer images.

Refer to the installation guide 
(separate leaflet included with the 
CD-ROM).

See Connecting the Camcorder to a 
Computer in the Digital Video 
Software  instruction manual 
(electronic version on PDF file).

Set the auto-launch setting.
• See Starting CameraWindow 
(Windows) or Auto-downloading 
(Macintosh) in the Digital Video 
Software instruction manual (electronic 
version on PDF file).
• The direct transfer menu appears on 
the camcorder screen and the 

 

button lights up.

IMPORTANT

 

Correct performance cannot be guaranteed 

for discs recorded on another digital device and 
inserted in this camcorder.
 

When the DISC or CARD access indicator is 

on or flashing do not perform the following 
actions. Doing so may result in permanent data 
loss.
- Do not subject the camcorder to vibrations or 
strong impacts.
- Do not open the disc cover/memory card slot 
cover and do not remove the disc or memory 
card.
- Do not disconnect the USB cable.
- Do not turn off the camcorder or the computer.
- Do not change the position of the 

/

 

switch or the operating mode.
 

Operation may not work correctly depending 

on the software and the specifications/settings 
of your computer.
 

If you wish to use the image files on your 

computer, make copies of them first, and use 
the copied file, retaining the original.

D119_NTSC-E.book  Page 89  Monday, December 18, 2006  10:14 AM