Q-See QD113P 전단

INTRODUCTION

Thank you for your purchase of the Q-See QD113P
Portable Surveillance Device. This versatile tool is
built around an ultra-mini camera which combines
1.3-megapixel still photography and high-resolution
real-time video with audio in a compact, discrete
package. Store nearly 4,000 pictures or 2 hours of
video on the internal 4GB memory. View or save
your files on any PC with a USB port. Recharge the
pen with the included charger or from a computer’s
USB port. The ease of use, small size and el-
egant design make this a valuable tool for security
personnel, business people, students, tourists and
others.

STILL IMAGE CAPTURE

VIDEO RECORDING

PEN

Rotate the metal collar at the tip to
extend or retract the writing nib.

USB DRIVE

The pen can be used as a standard USB Flash
memory stick for transporting and transferring files.

INSUFFICIENT MEMORY OR BATTERY

When the camera’s memory is full or the battery
has run out of power, the Status Indicator light will
alternately flash amber and blue for five seconds.
It will then save the current file and shut down. You
must remove the files stored on the memory to
make space available to record further or recharge
the battery as appropriate.

PARTS

OPERATION

CHARGING

The pen features a high-capacity rechargable

lithium polymer battery. This form of battery does

not have a “memory” effect meaning that it can

be recharged at any time without loss of capacity.

However, it is recommended that you fully charge

the battery and then use the camera normally until

it is fully discharged before recharging. Cycling the

battery in this manner for the first five times will

ensure maximum battery capacity and operation

time.
When charging the battery – whether using the

included charger, or plugged into an active USB

port – the status light will flash yellow/amber until

the battery is fully charged. During the first few

uses, allow the pen to continue charging for an

hour after the light stops flashing.
When using the charger, both the green and red

lights will illuminate until the battery is fully charged.

When fully charged, only the red light will remain

illuminated.

SETTING DATE & TIME

To ensure that your camera records the proper

date and time on the files, you should run the

Setting Time Tools V2.0 program located in the

folder of the same name on the included mini-CD.
When the program launches, a Command window

will open and the program will update the date and

time based on your computer’s settings.

HELPFUL HINTS

• When taking pictures, you will get the best

results if both you and your subject are relatively

still.

• The camera should be at least one foot from

your subject when taking pictures.

• While recording video, you should try to keep

the camera steady and avoid rapid movements

for best video quality.

• You should not hold the pocket clip while taking

video in order to avoid blocking the microphone

or lens.

1. Operation Button

2.  Status indicator light
3.  Camera lens
4.  Microphone

(behind pocket clip)

5. Reset button

6. USB plug

7. Mode Switch

Left = Video

Right = Still Image

8. Ball-point pen

1. Move the Mode Switch to

the right (use the pen’s tip if

needed.)

2. Press the Operation Button for

1 second. The Status Indicator

light will briefly illuminate amber

before switching to the blue

“Ready” status.

3. Press once on the Operation

Button to take a picture. The

Status Indicator light will briefly

flash amber in addition to the

steady blue. The camera is

ready to take another picture.

4. To turn off the camera, press

and hold the Operation Button

until the Status Indicator light

goes off. To conserve energy,

the camera will automatically

turn off after a few minutes of

inactivity as well.

1. Move the Mode Switch to the

left (use the pen’s tip if needed).

2. Press the Operation Button for

1 second. The Status Indicator

light will briefly illuminate

amber before switching to blue

indicating that the camera is

recording.

3. Press the Operation Button

again to end the recording. The

Status Indicator light will switch

from blue to amber indicating

that the recording has been

saved and the camera is now on

“standby” and ready to record