Polycom ViaVideo 사용자 설명서
Appendix
Network Connection
ViaVideo User’s Guide
68
www.polycom.com
1.
Go to the Quality of Service and Firewall screen (System
Info>Setup>H.323>QOS).
Info>Setup>H.323>QOS).
2.
Select the Use Fixed Ports option.
3.
If you used the default port range when assigning the ports in
your firewall interface, you don’t need to change anything.
ViaVideo automatically enters this range. If you are using a
different range, enter the port numbers for that range here.
your firewall interface, you don’t need to change anything.
ViaVideo automatically enters this range. If you are using a
different range, enter the port numbers for that range here.
4.
You should have already performed your NAT configuration. if
not, see “Configure Your ViaVideo for NAT,” on page 69, and
follow the instructions listed there.
not, see “Configure Your ViaVideo for NAT,” on page 69, and
follow the instructions listed there.
Router With Firewall, Using a DMZ
If you are using a router with a firewall, and want to place the PC
running ViaVideo outside the firewall, you need to perform the
following tasks:
running ViaVideo outside the firewall, you need to perform the
following tasks:
•
Configure ViaVideo to work with your firewall’s Network Address
Translator
Translator
•
Assign your ViaVideo to the DMZ.
ViaVideoUG.book Page 68 Thursday, December 7, 2000 2:49 PM