Canon 9592B002 사용자 설명서

FTP File Transfer

192

Transferring Multiple Clips or Photos

1 Connect the camcorder to the desired network (A 180).

• With Camera Access Point connections, you need to actively

connect the Wi-Fi enabled device to the camcorder.

2 Open the index screen that contains the clips or photos you want

to transfer (A 146).

3 Open the [FTP Transfer] submenu.

[w Other Functions] > [Clips] or [Photos] > [FTP Transfer]

4 Select [Select] to select which clips/photos to transfer, or [All] to transfer all the clips/photos and

then press SET.

• If you selected [Select], use the joystick to move between the clips/photos. Press SET to select a clip/photo

to transfer and repeat as necessary. After selecting all the desired clips/photos, press the MENU button.

5 Select [OK] and then press SET.

•

will appear on the top of the screen, next to the connection type icon. When the icons turn white, all the

applicable clips/photos will be transferred to the FTP server. When using a LAN connection, the LAN access
indicator will flash quickly while the files are being transferred.

• Select [Cancel] instead to cancel the operation.

• While the clips/photos are transferred, you can press SET to cancel.

• When the transfer is completed, the network icons will turn yellow and then disappear from the screen.

6 When the confirmation message appears, press SET.

IMPORTANT

• Observe the following precautions when transferring files. Failing to do so may interrupt the transfer and

incomplete files may remain at the transfer destination.
- Do not open the CF card slot cover or SD card slot cover.
- Do not disconnect the power source or turn off the camcorder.

• If incomplete files remain at the transfer destination, check the content and make sure they are safe to delete

before deleting them.

NOTES

• Depending on the access point’s settings and capabilities, it may take some time to transfer files.

[w Other Functions]

[Clips]

[Photos]

[FTP Transfer]

COP