Polaroid MAXXUM HTsi 사용자 설명서
Focus is confirmed
Continuous autofocus – Focus is confirmed
Continuous autofocus – Lens focusing
Shutter is locked
Focus cannot be confirmed – Shutter is locked.
Subject is too close or is one of the special focus
situations described on page 22.
Subject is too close or is one of the special focus
situations described on page 22.
21
TAKING PICTURES IN FULL-AUTO
20
TAKING PICTURES IN FULL-AUTO
1. Slide the main switch to ON.
2. Press the program-reset
button to set the camera to
Full-Auto.
Full-Auto.
• The camera will return to its default
settings (p77).
3. If using a zoom lens, rotate
the lens’ zooming ring to
frame the subject as desired.
frame the subject as desired.
4. Center your subject in the
focus frame [ ], then press
the shutter-release button
partway down to activate
autofocus.
the shutter-release button
partway down to activate
autofocus.
•
or
will appear in the viewfinder
when focus is confirmed.
• The built-in flash will pop-up and fire when
necessary.
5. Press the shutter-release
button all the way down to
take the picture.
take the picture.
• In low-light conditions, the AF illuminator
(flash) will fire to determine focus distance.
• Use focus hold (p23) if your subject is
outside the focus frame.
Focus Signals
The following signals appear in
the viewfinder to indicate the focus
status when the shutter release
button is pressed partway down.
the viewfinder to indicate the focus
status when the shutter release
button is pressed partway down.
2154-E (US).qed 3/4/98 2:39 PM Page 20