Polaroid MAXXUM HTsi 사용자 설명서
3. Press the exposure-
compensation button and turn
the control dial to select the
aperture.
the control dial to select the
aperture.
• Refer to the flash range table on page 25
to determine the aperture setting and the
flash range.
flash range.
47
M-MODE – MANUAL
46
M-MODE – MANUAL
– The exposure will over-
expose your subject.
– The exposure will under-
expose your subject.
Metering in Manual Mode
In manual mode, the meter index in the viewfinder and the data
panel indicates how your exposure compares with the camera’s
meter reading.
panel indicates how your exposure compares with the camera’s
meter reading.
1. Press the flash-mode button
to pop-up the built-in flash.
•
will appear in the data panel.
M-Mode Flash
When the built-in flash is up or an attached accessory flash is on, it
will fire each time a picture is taken. Flash exposure is controlled by
the camera’s TTL automatic flash metering system.
will fire each time a picture is taken. Flash exposure is controlled by
the camera’s TTL automatic flash metering system.
Push the built-in flash down or turn the accessory flash off.
•
will be displayed in the data panel.
Cancelling the Flash
2. Turn the control dial to select
any shutter speed up to
1/125th of a second.
1/125th of a second.
If an exposure compensation indicator does not
appear, your settings agree with the exposure
determined by the camera.
appear, your settings agree with the exposure
determined by the camera.
2154-E (US).qed 3/4/98 2:41 PM Page 46