Canon HF10 사용자 설명서
Photos
70
[
MENU]
[
SYSTEM SETUP]
[IMG QUALITY]
Desired image quality*
Desired image quality*
* The number displayed at the bottom
indicates the approximate number of
images that can be recorded with the
current quality setting.
images that can be recorded with the
current quality setting.
1 Play back the scene containing
the picture you want to capture.
2 Pause the playback at the point
you want to capture.
3 Press
fully.
NOTES
• The data code of the still image will
reflect the date and time of recording of
the original scene.
the original scene.
• A still image captured from a scene with
lots of fast movement may be blurred.
•
The still image will be recorded
to the memory selected for recording
still images (
still images (
33).
Protecting Photos
You can protect still images from
accidental erasure.
accidental erasure.
FUNC.
(
28)
1
Open the image selection screen.
[
PROTECT]
[
PROTECT] appears on the
screen.
2
Select (
) the still image you
want to protect.
3
Press
to protect the still
image.
appears on the bottom bar and
the image cannot be erased. Press
again to cancel the image
protection.
4
Repeat steps 2-3 to protect
additional images or press
additional images or press
twice to close the menu.
IMPORTANT
Initializing the memory (
33) will
permanently erase all recordings,
including protected still images.
including protected still images.
Copying Photos
You can copy still images from the built-
in memory to the memory card and vice
versa.
in memory to the memory card and vice
versa.
POINTS TO CHECK
Select in advance the memory from which
you want to copy the still images (
you want to copy the still images (
).
T
O
CAPTURE
THE
STILL
IMAGE
(
FUNC.
FUNC.
PHOTO
(
FUNC.
FUNC.