Canon MD 215 사용자 설명서

다운로드
페이지 77
65
Lithium Button Battery
• Do not pick up the battery using 
tweezers or other metal tools, as this 
will cause a short circuit.
• Wipe the battery with a clean dry 
cloth to ensure proper contact.
Storage
If you do not intend to use the 
camcorder for a long time, store it in a 
place free of dust, in low humidity, and 
at temperatures not higher than 30
°C.
Cleaning
Camcorder Body
• Use a soft, dry cloth to clean the 
camcorder body. Never use 
chemically treated cloth or volatile 
solvents such as paint thinner.
Lens and Viewfinder
• If the lens surface is dirty, the 
autofocus may not work properly.
• Remove any dust or dirt particles 
using a non-aerosol type blower 
brush.
• Use a clean, soft lens-cleaning cloth 
to gently wipe the lens or viewfinder. 
Never use tissue paper.
LCD Screen
• Clean the LCD screen using a clean, 
soft lens-cleaning cloth.
• Condensation may form on the 
surface of the screen when the 
temperature changes suddenly. Wipe 
it with a soft dry cloth.
WARNING!
• The battery used in this device may 
present a fire or chemical burn hazard 
if mishandled.
• Do not disassemble, modify, immerse 
in water, heat above 100 °C or 
incinerate the battery.
• Backup battery: Replace with a 
CR1616 battery made by Panasonic, 
Hitachi Maxell, Sony, Toshiba, Varta or 
Renata.  Use of other batteries may 
present a risk of fire or explosion.
 
Lithium battery for the wireless 
controller: Replace with a CR2025 
battery made by Panasonic, Hitachi 
Maxell, Sony, Sanyo, or with 
Duracell2025. Use of other batteries 
may present a risk of fire or explosion.
• Do not insert the battery into the 
mouth. If swallowed, seek medical 
assistance immediately. The battery 
case may break and the battery fluids 
may cause internal damage.
• Keep the battery out of the reach of 
children.
• Do not recharge, short-circuit or insert 
the battery in the wrong direction.
• The used battery should be returned 
to the supplier for safe disposal.
Maintenance/Others
CO
PY