Canon HV10 사용자 설명서
Getting Started
20
3
Press the
mark on the
cassette compartment until it clicks.
4
Wait for the cassette compartment
to retract automatically and close
the cassette compartment cover.
to retract automatically and close
the cassette compartment cover.
IMPORTANT
Do not interfere with the cassette
compartment while it is opening or closing
automatically, or attempt to close the cover
before the cassette compartment has fully
retracted.
automatically, or attempt to close the cover
before the cassette compartment has fully
retracted.
Be careful not to get your fingers caught in
the cassette compartment cover.
NOTES
If the camcorder is connected to a power
source, cassettes can be inserted/removed
even if the POWER switch is set to
source, cassettes can be inserted/removed
even if the POWER switch is set to
.
Inserting and Removing a Memory Card
Use only commercially available miniSD
cards.
cards.
1
Turn off the camcorder.
2
Open the memory card slot cover.
3
Insert the memory card straight all
the way into the memory card slot.
the way into the memory card slot.
4
Close the cover.
Do not force the cover closed if the
memory card is not correctly inserted.
memory card is not correctly inserted.
T
O REMOVE THE MEMORY CARD
First push the memory card once to
release it, and then pull the card out.
release it, and then pull the card out.
IMPORTANT
Make sure to initialize all memory cards
before using them with this camcorder for the
first time (
first time (
56).
Memory cards have front and back sides that
are not interchangeable. Inserting a memory
card facing the wrong direction can cause a
malfunction of the camcorder.
card facing the wrong direction can cause a
malfunction of the camcorder.
NOTES
Performance cannot be guaranteed for all
miniSD cards.
miniSD cards.
Preparing the Camcorder
1
Turn on the camcorder.
The lens cover will open automatically.