Canon MV830 사용자 설명서

다운로드
페이지 147
96
Recording Movies on a Memory Card
You can record Motion JPEG movies with the camcorder, from a tape in the camcorder or 
from devices connected via the DV terminal or the AV terminal. The sound of a movie 
recorded on a memory card will be monaural.
1. Press the start/stop button to begin recording.
With SD Memory Cards up to 512 MB, you can record until 
“CARD FULL” appears (approx. 33 minutes with a 512 MB SD 
Memory Card). With MultiMediaCards, the recording time is 
limited to 10 sec. in 320 x 240 pixels and 30 sec. in 160 x 120 
pixels.
2. Press the start/stop button to stop recording.
 Do not turn off the camcorder, change the position of the TAPE/CARD switch, 
disconnect the power source, open the memory card cover or remove the 
memory card while the card access indicator is flashing. Doing so could result 
in data damage.
 When you are using a SD Memory Card, make sure that the protect switch is 
set to allow recording.
 Do not load/unload a cassette during recording.
 We recommend using a Canon SD Memory Card, or a SD Memory Card with a 
transfer rate of more than 2 MB/sec., right after you have formatted it with this 
camcorder. With memory cards not formatted with this camcorder, or when 
recording/erasing has been repeatedly performed, the writing speed may be 
lower and recording may stop.
 You can select the focusing point when recording a movie on the memory card.
 Users of Windows XP: When you plan to connect the camcorder to a computer, 
keep the length of one movie shorter than approx. 12 min. in 320 x 240 and 35 
min. in 160 x 120.
Recording from a Tape in the Camcorder
1. Play back the tape.
2. Press the start/stop button when the scene you wish to record 
appears.
3. Press the start/stop button to stop recording.
CAMERA
PLAY (VCR)
CARD CAMERA
CARD PLAY
CAMERA
PLAY (VCR)
CARD CAMERA
CARD PLAY
PLA
Y (V
CR)
OFF
CAM
ERA
POW
ER