Canon XF200 사용자 설명서

Preparing Recording Media

Removing a CF card

1 Wait until the access indicator of the CF card slot with

the CF card to be removed is off.

2 Slide down the CF card slot cover switch and open the

CF card slot cover.

3 Push in the CF card release button to release the CF

card.

4 Pull the CF card all the way out and close the CF card

slot cover.

IMPORTANT

• Observe the following precautions while the CF2 or CF3 access indicator is illuminated in red. Failure to do

so may result in permanent data loss.
- Do not disconnect the power source or turn off the camcorder.
- Do not open the cover of the CF card slot being accessed.

Inserting and Removing an SD Card

1 Make sure the SD card access indicator is off.

2 Open the SD card slot cover.

3 Insert the SD card, with the label facing up, all the way into

the SD card slot until it clicks.

• To remove the SD card, push the SD card once to release it.

When the SD card springs out, pull it all the way out.

4 Close the SD card slot cover.

• Do not force the cover closed if the SD card is not correctly

inserted.

If you set the [w Other Functions] > [Media Access LED] setting to [Off], the access indicator will not illuminate.

IMPORTANT

• Observe the following precautions while the SD card access indicator is on or flashing. Failure to do so may

result in permanent data loss.
- Do not disconnect the power source or turn off the camcorder.
- Do not remove the SD card.

• SD cards have front and back sides that are not interchangeable. Inserting an SD card facing the wrong

direction can cause a malfunction of the camcorder. Be sure to insert the SD card as described in the
procedure above.

SD card access indicator

SD card status

On or flashing

Accessing the SD card.

Off

An SD card is not inserted or the
SD card is not being accessed.

햴

햵

햳

햴

햵

SD card access
indicator

COP