Canon XF200 사용자 설명서

Onscreen Markers and Zebra Patterns

NOTES

• You can turn off all other onscreen displays, leaving only the onscreen markers (A 53).

• If you set an assignable button to [Markers] (A 127), you can press the button to turn the onscreen markers

on/off.

Displaying Zebra Patterns

The camcorder has a zebra pattern feature that shows black and
white diagonal stripes over areas that are overexposed. This is
displayed only on the screen and will not affect your recordings.
There are two types of zebra patterns and you can display both
simultaneously. Zebra 1 lets you identify areas within a certain
range (±5% of a specified level) while zebra 2 lets you identify
areas that are over a specified level. When you display both
simultaneously and they overlap, only zebra 1 will be displayed in
those areas.

1 Open the zebra pattern [Select] submenu.

[£ OLED/VF Setup] > [Zebra] > [Select]

2 Select [Zebra 1], [Zebra 2] or [Zebra 1&2] and then press

SET.

3 Open the zebra level submenu.

[£ OLED/VF Setup] > [Zebra] > [Zebra 1 Level] or [Zebra
2 Level]

4 Select a zebra level, press SET and then press MENU to

close the menu.

5 Press the ZEBRA button to turn the selected zebra

pattern on/off.

• Alternatively, you can use the [£ OLED/VF Setup] >

[Zebra] > [Setting] setting to turn the zebra pattern on/off.

NOTES

• You can use the [£ OLED/VF Setup] > [Zebra] > [HD Output] setting to display the zebra pattern on an

external monitor connected to the MON. terminal (

, HD output only) or HDMI OUT terminal (HD output

only).

Center marker

Grid

[£ OLED/VF Setup]

[Zebra]

[

Select]

[

Zebra 1]

COP