Canon T5 사용자 설명서

111

Three methods (metering modes) to measure the subject’s brightness 
are provided. Normally, evaluative metering is recommended.
In Basic Zone modes, automatic selection is set automatically.

 

Under the [z2] tab, select [Metering 
mode], then press <0>.

 

Select the desired metering mode, 
then press <0>.

q

Evaluative metering 
This is a general-purpose metering mode suited 
even for backlit subjects. The camera sets the 
exposure automatically to suit the scene.

w

Partial metering
Effective when the background is much brighter 
than the subject due to backlighting, etc. The 
gray area in the left figure is where the 
brightness is metered to obtain the standard 
exposure.

e

Center-weighted average metering
The brightness is metered at the image center 
and then averaged for the entire scene. This 
metering mode is for advanced users.

q

 Changing the Metering ModeN

With q (Evaluative metering), the exposure setting will be locked when you 
press the shutter button halfway and focus is achieved. With w (Partial 
metering) and e (Center-weighted average metering), the exposure 
setting is set at the moment of exposure. (The exposure setting is not locked 
when you press the shutter button halfway.)