Canon T5 사용자 설명서

152

 

Under low- or bright-light conditions, the Live View image may not reflect 
the brightness of the captured image.

 

Even if a low ISO speed is set, noise may be noticeable in the displayed 
Live View image under low light. However, when you shoot, the image 
recorded will have minimal noise. (The image quality of the Live View 
image is different from that of the recorded image.)

 

If the light source (illumination) within the image changes, the screen 
may flicker. If this happens, exit Live View shooting and resume Live 
View shooting under the actual light source.

 

If you point the camera in a different direction, it may throw off the Live 
View image’s correct brightness momentarily. Wait until the brightness 
level stabilizes before shooting.

 

If there is a very bright light source in the picture, the bright area may 
appear black on the LCD monitor. However, the actual captured image 
will correctly show the bright area.

 

In low light, if you set the [52: LCD brightness] to a bright setting, noise 
or irregular colors may appear in the Live View image. However, the 
noise or irregular colors will not be recorded in the captured image.

 

When you magnify the image, the image sharpness may look more 
pronounced than in the actual image.

 

During Live View shooting, some Custom Function settings will not take 
effect (p.257).

 

During Live View shooting, focus preset for super telephoto lenses 
cannot be used.

 

FE lock is not possible when the built-in flash or an external Speedlite is 
used. Modeling flash will not work with an external Speedlite.

Do not hold the camera in the same position for long periods of time. 
Even if the camera does not feel too hot, prolonged contact with the same 
body part may cause skin redness, blistering or low-temperature contact 
burns. The use of a tripod is recommended for people with circulation 
problems or very sensitive skin, or when using the camera in very hot 
places.