Canon T5 사용자 설명서

177

White <s> and Red <E> Internal Temperature Warning Icons

 

If the camera’s internal temperature increases due to prolonged movie 
shooting or under a high ambient temperature, a white <s> or red <E> 
icon will appear.

 

The white <s> icon indicates that the image quality of still photos will 
deteriorate. It is recommended that you stop still photo shooting for a 
while and allow the camera to cool down. Since movie image quality will 
hardly be affected, you can still shoot movies.

 

The red <E> icon indicates that movie shooting will soon be terminated 
automatically. If this happens, you will not be able to shoot again until the 
camera’s internal temperature decreases. Turn off the power and let the 
camera rest for a while.

 

Shooting a movie at a high temperature for a prolonged period will cause 
the <s> or <E> icon to appear earlier. When you are not shooting, turn 
off the camera.

 

If the attached lens has an Image Stabilizer and you set the Image 
Stabilizer (IS) switch to <1>, the Image Stabilizer will operate at all 
times even if you do not press the shutter button halfway. The Image 
Stabilizer consumes battery power and may shorten the total movie 
shooting time or decrease the number of possible shots. If you use a 
tripod or if the Image Stabilizer is not necessary, it is recommended that 
you set the IS switch to <2>.

 

The camera’s built-in microphone will also pick up camera operation 
noise.

 

If the brightness changes during autoexposure movie shooting or if AF 
operates during movie shooting, that part may look momentarily still 
when you play back the movie.

 

If there is a very bright light source in the picture, the bright area may 
appear black on the LCD monitor. The movie will be recorded in almost 
the same way you see it on the LCD monitor.

 

In low light, noise or irregular colors may appear in the image. The movie 
will be recorded in almost the same way you see it on the LCD monitor.