Canon T5 사용자 설명서
30
1
Remove the protective cover.
Detach the protective cover provided
with the battery.
with the battery.
2
Attach the battery.
As shown in the illustration, attach the
battery securely to the charger.
battery securely to the charger.
To detach the battery, follow the
above procedure in reverse.
above procedure in reverse.
3
Recharge the battery.
For LC-E10
For LC-E10
As shown by the arrow, flip out the
battery charger’s prongs and insert
the prongs into a power outlet.
battery charger’s prongs and insert
the prongs into a power outlet.
For LC-E10E
Connect the power cord to the
charger and insert the plug into a
power outlet.
charger and insert the plug into a
power outlet.
X
Recharging starts automatically and
the charge lamp lights up in orange.
the charge lamp lights up in orange.
X
When the battery is fully recharged,
the full-charge lamp will light up in
green.
the full-charge lamp will light up in
green.
It takes approx. 2 hours to fully recharge a completely
exhausted battery at room temperature (23°C / 73°F). The time
required to recharge the battery will vary greatly depending on
the ambient temperature and the battery’s remaining capacity.
exhausted battery at room temperature (23°C / 73°F). The time
required to recharge the battery will vary greatly depending on
the ambient temperature and the battery’s remaining capacity.
For safety reasons, recharging in low temperatures (6°C - 10°C /
43°F - 50°F) will take longer (up to approx. 4 hours).
43°F - 50°F) will take longer (up to approx. 4 hours).
Charging the Battery
LC-E10
LC-E10E
Full-charge lamp
Charge lamp