Canon T5 사용자 설명서
i
: Changing the ISO SpeedN
90
*1: Fixed at ISO 800 for bulb exposures.
*2: Depends on the maximum ISO speed limit set.
*3: If fill flash results in overexposure, ISO 100 or a higher ISO speed will be set.
*4: If bounce flash is used with an external Speedlite in a Basic Zone (except
*2: Depends on the maximum ISO speed limit set.
*3: If fill flash results in overexposure, ISO 100 or a higher ISO speed will be set.
*4: If bounce flash is used with an external Speedlite in a Basic Zone (except
<6>) mode or <d>, ISO 800 - 1600 (or up to the maximum limit) will be set
automatically.
automatically.
*5: Fixed at ISO 400 if the maximum limit is ISO 400.
For ISO Auto, you can set the maximum ISO speed limit within ISO 400
- ISO 6400.
- ISO 6400.
Under the [z3] tab, select [ISO Auto],
then press <0>. Select the ISO speed,
then press <0>.
then press <0>. Select the ISO speed,
then press <0>.
Shooting Mode
ISO Speed Setting
A
/7/C/3/4/5/6
Automatically set within ISO 100 - 3200
d
/s/f/a
*1
Automatically set within ISO 100 - 6400
*2
2
ISO 100
With flash
ISO 800
*3*4*5
3
Setting the Maximum ISO Speed for [ISO Auto]N
When [AUTO] is set, the ISO speed is indicated in whole-stop
increments. However, the ISO speed is actually set in finer increments.
Therefore, in the image’s shooting information (p.229), you may find an
ISO speed such as 125 or 640 displayed as the ISO speed.
increments. However, the ISO speed is actually set in finer increments.
Therefore, in the image’s shooting information (p.229), you may find an
ISO speed such as 125 or 640 displayed as the ISO speed.
In the <2> mode, the ISO speed shown in the table is actually used
even if ISO 100 is not displayed.
even if ISO 100 is not displayed.