Canon V3 사용자 설명서

113

You can use a video-compatible television as a monitor to shoot or
replay images when it is connected to the camera with the supplied AV
Cable AVC-DC200. You must shut the TV and camera power off
before you attach or detach the AV cable.

• After you have attached the AV cable at both ends, turn on the TV

and set its TV/Video switch to Video.

• Set the mode switch to 

, 

 or 

 and turn the camera power on.

You can shoot or replay images using the normal procedures.

• If the images are not appearing on the TV when shooting, press the

 button.

• A TV cannot be used in 

 or 

 mode.

• No image will appear on the LCD monitor when the

camera is connected to a TV.

• If the TV is a stereo model, you can plug the audio plug

into either the left or right Audio In jack. Please refer to
the TV’s manual for details.

• The video output signal can be switched (NTSC or PAL) to

accommodate different regional standards. The default
setting varies between regions.

NTSC: Japan, U.S.A., Canada, Taiwan, etc.
PAL:

Europe, Asia (excluding Taiwan), Oceania, etc.

If the video system is set incorrectly, the camera output may
not display properly.

Yellow

Black

08-124usCUGE_111-129_GM.p65

7/26/02, 11:25 AM

113