Canon V3 사용자 설명서

69

• You are recommended to set the shooting mode to 

 and

the exposure compensation setting to zero (

±0) before

setting a custom white balance. The correct white balance
may not be obtained when the exposure setting is incorrect
(image appears completely black or white).

• It is also advisable to use the LCD monitor to compose the

shot and to zoom in to the telephoto end setting.

• Since the white balance data cannot be read in 

 and 

mode, preset the white balance in another shooting mode
first before selecting the 

 or 

 mode.

• Set the flash on or off when setting a custom white balance.

The white balance may not be accurate if the setting
conditions and shooting conditions are not the same.
If the flash fires when setting a custom white balance with
the flash set to 

 or 

, ensure that you also use the flash

when you go to shoot.

05-124usCUGE_060_073_GM.p65

7/26/02, 11:16 AM

69