Canon V3 사용자 설명서

Printing

• Attach the direct interface cable to the

printer.

• Open the terminal cover on the camera

and insert the cable’s connector into
the camera’s DIGITAL • A / V OUT
terminal. Orient the cable so that the
connector’s

symbol faces the

camera’s front panel.

• Press the printer’s ON/OFF button to

turn on its power. (If you are using Card
Photo Printer CP-10, the printer’s power
will turn on in Step 2 when printer and
power cable are connected.)

• Set the mode switch to the

position

and turn on the camera’s power.

•

will display when the printer is

correctly connected.

Connecting to a Bubble Jet Printer

• Please read the Quick Start Guide supplied with your BJ

printer to see if it is compatible with the camera’s direct print
function, and for instructions regarding the connection cables
and the printer’s general operation.

Direct Interface
Cable (DIF-200)

Align the symbols on
the camera and cable to
connect them.

This shows when a
direct print function
compatible printer is
connected.

▲

Shut the camera’s

power off (p. 26).

07-124usCUGE_090_110_GM.p65

7/26/02, 11:23 AM