Canon SL1 사용자 설명서

217

Handy Features

You can set how long the image is displayed on the LCD monitor 
immediately after capture. If [Off] is set, the image will not be displayed 
immediately after image capture. If [Hold] is set, the image review will 
be displayed up until the [Auto power off] time.
During image review, if you operate any camera controls such as 
pressing the shutter button halfway, the image review will end.

Under the [z1] tab, select [Image 
review], then press <0>. Select the 
desired setting, then press <0>.

To save battery power, the camera turns off automatically after the set 
time of idle operation elapses. You can set this auto power-off time. 
When the camera has turned off due to auto power off, you can turn it 
on again by pressing the shutter button halfway or pressing any of the 
following buttons: <M>, <B>, <x>, <A>, etc.
If [Disable] is set, either turn off the camera or press the <B> 
button to turn off the LCD monitor to save battery power.
Even when [Disable] is set, if the camera is not used for 30 min., 
the LCD monitor will turn off automatically. To turn on the LCD 
monitor again, press the <B> button.

Under the [52] tab, select [Auto power 
off], then press <0>. Select the 
desired setting, then press <0>.

3

3

COP

Y