Canon SL1 사용자 설명서

93

d

: Program AE

 

Change the ISO speed. Use the built-in flash.
To match the subject and ambient lighting level, you can change the 
ISO speed (p.98) or use the built-in flash (p.111). In the <d> mode, 
the built-in flash will not fire automatically. In indoors or during low 
light shooting, you should therefore press the <I> (flash) button to 
raise the built-in flash.

 

Change the program using Program shift.
After pressing the shutter button halfway, turn the <6> dial to 
change the shutter speed and aperture setting combination 
(program). Program shift is canceled automatically after the picture 
is taken. Program shift is not possible with flash.

 

If the “30"” shutter speed and the lower f/number 
blink, it indicates underexposure. Increase the ISO 
speed or use flash.

 

If the “4000” shutter speed and the higher f/number 
blink, it indicates overexposure. Decrease the ISO 
speed.

Differences Between <d> and <A> (Scene Intelligent Auto)

In the <A> mode, many functions, such as the AF operation and metering 
mode, are set automatically to prevent spoiled shots. The functions you can 
set are limited. With <d> mode, only the shutter speed and aperture are set 
automatically. You can freely set the AF operation, metering mode, and 
other functions (p.316).

COP

Y