Canon MP950 사용자 설명서

Chapter 12 

Troubleshooting

z PictBridge or Canon Bubble Jet Direct compatible digital cameras can be 

connected to your machine for direct printing.

z This section describes errors that are indicated on Canon-brand PictBridge- 

or Bubble Jet Direct compatible cameras. The error messages and 
operations may vary depending on the camera you are using. If you are using 
a non-Canon PictBridge compatible camera and not sure how to clear the 
printer error from the camera, confirm the message displayed on the LCD of 
the machine and clear the error. For clearing an error from the machine, see 

“An Error Message is Displayed on the LCD” on page 115

.

z A communication time out occurs if printing takes a long time or if it takes too 

much time to send data. This may stop printing. In such cases, disconnect 
the cable between the machine and the camera, and reconnect the cable 
between the machine and the camera. Then, turn the camera on, if it does 
not automatically turn on. If the problem is still unresolved, select some other 
photo and check if it can be printed or not.

z Some PictBridge compatible devices may need to be switched to printing 

mode before connecting them to the machine. Also, it may need to be turned 
on manually or switched to replay mode after connected to the machine. 
Refer to the instruction manuals supplied with your PictBridge compatible 
device and take the necessary steps before connection.

z The Print Head nozzles may be clogged if printing becomes faint or colors 

are incorrect. See 

“When Printing Becomes Faint or Colors are Incorrect” on 

page 102

.

z If the paper is curled or its surface is scratched during printing, make sure 

that you are using the correct type of paper. If this error occurs even when 
you are using the correct type of paper, see 

“If printing surface abrasion is not 

resolved even after taking the actions above:” on page 126

.

z For the errors indicated on the camera and their solution, also refer to the 

user’s manual of the camera. For other troubles with a digital camera, contact 
the manufacturer of the camera.

z Load paper in either the Auto Sheet Feeder or Cassette which you have 

*1

z The camera does not support the page size that is selected on this 

z Open the Paper Output Tray to resume printing. Close the Inner Cover if 

Install a Print Head according to the Easy Setup Instructions.
If the Print Head has already been installed, remove the Print Head and 
reinstall it.