Canon MP950 사용자 설명서
140
Chapter 12
Troubleshooting
Trouble scanning with MP Navigator
Image position and size incorrect when scanning from the machine’s
operation panel
Cannot Scan Films
Thumbnail Display does not display correctly after previewing
Scanned image won’t open.
The file name extension is not supported by the application software.
Rescan the image using an application software, such as ArcSoft
PhotoStudio, and change the file name extension when saving the image.
Refer to the on-screen manual for each application software for the
detailed procedures.
Rescan the image using an application software, such as ArcSoft
PhotoStudio, and change the file name extension when saving the image.
Refer to the on-screen manual for each application software for the
detailed procedures.
Cause
Action
The original may not be scanned
correctly when [Document Size] is
set to [Auto Detect].
correctly when [Document Size] is
set to [Auto Detect].
Set the [Document Size] to the actual size of the original, and scan it
again. If the size you need cannot be set, scan to a larger size and trim it.
For more information, refer to the Scan Guide.
again. If the size you need cannot be set, scan to a larger size and trim it.
For more information, refer to the Scan Guide.
Cause
Action
MP Navigator settings do not match
the originals.
the originals.
Set the MP Navigator [Document Type] and [Document Size] to match
those of the originals being scanned. For more information, refer to the
Scan Guide.
those of the originals being scanned. For more information, refer to the
Scan Guide.
Cause
Action
ScanGear MP and MP Navigator
settings are not set for scanning
film.
settings are not set for scanning
film.
z When scanning in the Simple Mode in ScanGear MP, select [Negative
Film (Color)] or [Positive Film (Color)] in the [Select Source] category.
z When scanning in the Advanced Mode in ScanGear MP, select [Color
Negative Film], [Color Positive Film], [Monochrome Negative Film],
[Monochrome Positive Film] in the [Select Source] category.
[Monochrome Positive Film] in the [Select Source] category.
z When scanning on the MP Navigator, scan using [Scan Film].
Resolution setting is too high and
scanning is slow.
scanning is slow.
If the Output Resolution is set to too high, scanning takes a long time or
the computer seems to be freezing. If this happens, lower the Output
Resolution and rescan.
the computer seems to be freezing. If this happens, lower the Output
Resolution and rescan.
Cause
Action
You are attempting to scan film with
extremely dark or bright contents./
The spaces between frames are
extremely narrow (0.08" / 2 mm is
standard).
extremely dark or bright contents./
The spaces between frames are
extremely narrow (0.08" / 2 mm is
standard).
If thumbnails are not displayed properly after previewing with ScanGear
MP, scan in the Advanced Mode. For more information, refer to the Scan
Guide.
MP, scan in the Advanced Mode. For more information, refer to the Scan
Guide.
Cause
Action