Canon MP950 사용자 설명서

Chapter 1 

Before Printing

Turn on the machine before starting printing.

„ Turning on the Machine

Before turning on the machine, confirm that the Print Head and ink tanks are set into place.

Open the Operation Panel, then press [ON/OFF].

The Power Lamp flashes green for a while, and then turns on.

„ Turning off the Machine

To turn off the machine, press [ON/OFF].

The machine is off when the Power Lamp stops flashing and all Operation Panel lamps are 
off.

„ Setting the Power Save Mode

The machine enters Power save mode if not operated for a certain interval. In the Power save 
mode, the internal fluorescent lamp are turned off, and the selected Mode Lamp and the 
Power Lamp stay lit. You can configure the interval that the machine waits before entering 
Power save mode. See 

“Power save setting” on page 95

.

When you try to copy or scan, the machine will exit from Power save mode.

If you use the machine frequently, we recommend that you set the Power save transfer time 
to 1 hour or 8 hours.

„ The Screen-saver Mode

The LCD goes out if the machine is not operated for 5 minutes. Press any button to restore 
the display. You cannot change the period before the LCD goes out.

If preparatory operations above are not yet finished, follow the Easy 
Setup Instructions to complete them.

If the Alarm Lamp lights or flashes orange and an error message is 
displayed on the LCD, see 

“An Error Message is Displayed on the LCD” 

on page 115

.

When removing the power plug after turning off the machine, be sure to 
check that all the lamps on the Operation Panel are not lit. If the power 
plug is removed from the wall outlet with the lamps on the Operation 
Panel lit or blinking, the machine cannot protect its Print Head and may 
be unable to print.

See

“Keeping the Best Printing Results” on page 101

.