Canon MP950 사용자 설명서

Chapter 4 

Photo Printing from Photo or Film

Slowly close the Document Cover and press [OK]. 

The film is scanned.

Let's select a scanned photo and specify the number of prints, and print it.

„ Printing Photo Displayed on the LCD (Single-photo print)

Print a scanned photo.

Prepare for printing.

(1) Load paper.

See

“Loading Paper” on page 19

.

(2) Ensure that the proper paper source is selected.

See

“Changing the Paper Source” on page 23

.

(3) Scan a photo or a film.

See

“Scanning a Photo” on page 61

 or 

“Scanning a Film” on page 62

.

Select the print menu.

(1) Use [

] or [

] to select <Single-photo print>, then press [OK].

The photo selection screen is displayed.

z The photo or film is rescanned before printing starts. Do not open the 

Document Cover or remove the photo or film from the Platen Glass 
until printing is complete.

z If the film was not scanned properly, see 

“Cannot Scan Films” on 

page 118

.

z Press [PHOTO/FILM] when loading another film. If <Do you want to 

clear the scanned photo?> appears on the LCD, select <Yes>, press 
[OK] to delete the previous image data, then go to main step 2.

Specify [Feed Switch] so that the Auto Sheet Feeder Lamp is lit when 
feeding paper from the Auto Sheet Feeder and the Cassette Lamp is lit 
when feeding paper from the Cassette.