Canon MP950 사용자 설명서

Chapter 10 

Changing the Machine Settings

„ Date display

Changes the display order for shooting dates to be printed.

„ Read/write attribute

Selects whether to allow data to be written onto memory cards from a computer.

„ Power save setting

Specifies the time until Power saving is enabled.

You can select from <5 minutes>, <15 minutes>, <1 hour> or <8 hours>. The initial value is set 
to <1 hour>.

„ Slide show setting

Specifies the image display quality of the slide show.

Changes the language for LCD messages.

You can change the settings back to the default, except for the language for LCD messages and the 
position of the Print Head. 

Saves the settings for the Settings screen.

Loads the settings for the Settings screen that were saved.

z When <Print date only> or <Print date & file no.> is selected for <Date/

file no.> in the tab 1 on the Settings (Memory Card) screen, the 
shooting date is printed in the date display order you selected. For 
Print settings, see 

“To Change Print Settings” on page 34

.

z The shooting date format is as specified in the DPOF setting from 

DPOF printing.

If you set this setting to <Read/write mode>, card direct printing cannot be 
done. After you finish operation of the memory card dedicated drive, be 
sure to revert this setting to <Read-only mode>.

When <Image quality: Std> is selected, images are displayed at 5-second 
intervals. When <Image quality: High> is selected, images are displayed 
at different time intervals according to their resolutions.