Canon EOS5DMARKIIIKIT 사용자 설명서

151

3

 Custom Function SettingsN

You can change the function assigned to <0>. 
0: Default (no function)
1: Change quality

After pressing <0>, look at the LCD panel and turn the <5> dial 
to set the recording quality directly.

Press the <0> button to display the Picture Style selection screen 
on the LCD monitor. Turn the <5> dial to select the desired 
Picture Style, then press <0>.

Gives the same function as the <M> button.

Gives the same function as the <x> button.

For 1 sec. or longer exposures, noise reduction is performed 
automatically if long exposure noise is detected. Setting this to 
[Auto noise reduction] is very effective.

Noise reduction is performed for all exposures 1 sec. or longer. Setting 
this may reduce the noise even for exposures which would not have been 
noise detected/reduced at the [Auto noise reduction] setting.

Sets the flash sync speed to 1/200 sec. in the aperture-priority AE 
(Av) mode. (Against dark backgrounds such as the night sky, the 
subject’s background will look dark.)

After the exposure, noise reduction may take the same amount of time as the exposure time. While 
the noise reduction is in progress, image playback and menu operation are not possible. However, 
you can still shoot as long as the maximum burst indicator in the viewfinder shows “1” or higher.