Canon EOS5DMARKIIIKIT 사용자 설명서
22
1
Remove the cover.
When you remove the battery from
the camera, be sure to reattach the
cover to protect against short circuit.
the camera, be sure to reattach the
cover to protect against short circuit.
2
Attach the battery.
Align the battery front edge with the
<–> mark on the battery charger.
While pressing down the battery, slide
it in the direction of the arrow.
<–> mark on the battery charger.
While pressing down the battery, slide
it in the direction of the arrow.
To detach the battery, follow the
above procedure in reverse.
above procedure in reverse.
3
For CG-580
Flip out the prongs and recharge
the battery.
Flip out the prongs and recharge
the battery.
As shown by the arrow, flip out the
battery charger’s prongs.
battery charger’s prongs.
Insert the prongs into a power outlet.
For CB-5L
Connect the power cord and
recharge the battery.
Connect the power cord and
recharge the battery.
Connect the power cord to the
charger and insert the plug into the
power outlet.
charger and insert the plug into the
power outlet.
X
Recharging starts automatically and
the red lamp starts blinking.
the red lamp starts blinking.
X
The recharging time for a completely
exhausted battery is as follows:
BP-511A and BP-514: Approx. 100 min.
BP-511 and BP-512: Approx. 90 min.
exhausted battery is as follows:
BP-511A and BP-514: Approx. 100 min.
BP-511 and BP-512: Approx. 90 min.
Recharging the Battery
<–> mark
CG-580
CB-5L