Canon A520 사용자 설명서

34

Shooting – The Basics

Pressing Halfway
Pressing halfway 

automatically sets the 

exposure and focus.
z

Two beeps will sound 

when the camera has 

finished metering, and the upper indicator 

will light green or orange. If the LCD monitor 

is on, the AF frame will appear green.

z

The lower indicator will blink yellow and the 

beep will sound one time if the subject is 

difficult to focus on.

Pressing Fully
Pressing fully releases the 

shutter.
z

You will hear the shutter sound when the 

shot is complete. Do not move the camera 

until you hear this sound.

z

The upper indicator blinks green while data 

is recorded onto the memory card.

z

The picture appears for approximately three 

seconds on the LCD monitor, if it is on.

z

See page 159 for settings that can be 

changed in this mode.

z

With the Review function, you can change 

the length of time images show on the LCD 

monitor after shooting, or set it so they do 

not show at all (p. 36).

z

If the indicator blinks orange or yellow while 

you press the shutter button halfway, you 

can still press fully to take the shot.

z

Images are first saved into the camera’s 

internal memory before being recorded onto 

the memory card, allowing the next images 

to be taken immediately as long as 

sufficient space is available in the internal 

memory.

z

The beep and shutter sound can be set 

[On/Off] in the [Set up] menu (p. 70).

z

Even when the shutter sound is set to [

, 

, 

 (On)] (p. 74), no sound will be 

heard if [Mute] is set to [On].

z

There is no shutter sound in movie mode.

z

Shots cannot be taken while the flash is 

charging.

EC156&157CUG_Eng.book  Page 34  Friday, December 17, 2004  3:32 PM