Canon A520 사용자 설명서

46

Shooting – The Basics

z

When 

 is selected, pressing the SET button 

will allow you to set the start time (0 to 10 

seconds) and the number of shots (1 to 10 

shots). Select the setting item using the 

 or 

 button and change its value using the   or 

 button.

z

When 

 is selected, the self-timer lamp starts 

blinking when the shutter button is pressed all 

the way. The self-timer sounds and the blinking 

gets faster two seconds before the shutter 

activates.

z

When 

 is selected, the self-timer lamp blinks 

fast from the beginning. The shutter activates 

in two seconds.

z

When 

 is selected, the self-timer lamp will 

blink during shots, and self-timer sounds will 

sound as follows. If you set multiple shots to be 

taken, the self-timer will sound only for the first 

shot.
- The self-timer will not sound when set to [0 

sec.].

- The self-timer will not sound when set to [1 

sec.], but the beeps will sound.

- When the self-timer is set between 2 to 10 

sec., the self-timer will sound 2 seconds 

before the shutter activates.

z

Shooting procedures are the same as for the 

 mode (p. 33).

z

You can change the self-timer sound by 

changing the setting in [Self-timer Sound] in 

the [

(My Camera)] menu (p. 74).

z

When 

 is selected and the number of 

[shot] is set to two or more,

- if the internal memory is full, the interval 

between shots may lengthen.

- if the flash is to be used, the interval 

between shots will lengthen to 

accommodate the flash recharge time.

z

See Photo Tips and Information (p. 151).

EC156&157CUG_Eng.book  Page 46  Friday, December 17, 2004  3:32 PM