Canon A520 사용자 설명서

Shooting – Advanced Functions

Manually Setting the Shutter

Speed and Aperture

You can manually set the shutter speed and

aperture to shoot images. You can select settings

such as a long exposure to suit your purpose.

When you press the shutter button halfway, the

difference between the standard exposure* and

the selected exposure appears on the LCD

monitor. If the difference is more than ±2 stops,

“–2” or “+2” appears in red.

* The standard exposure is calculated by the AE function

according to the selected metering method.

See page 159 for settings that can be

changed in this mode.

If you wish to change the exposure, select

the shutter speed or the aperture with the

SET button and change the value using the

or button.

If the zoom is adjusted after these values

are set, the aperture value may change in

accordance with the zoom position.

The LCD monitor’s brightness matches the

selected shutter speed and aperture value.

When you select a fast shutter speed or

shoot a subject in a dark place, the image

will always be bright if the flash is set to

(Flash On, with Red-eye Reduction)

or (Flash

On).

For the correlation between aperture value

and shutter speed, see page 78.

EC156&157CUG_Eng.book Page 80 Friday, December 17, 2004 3:32 PM