Canon 8230B014 사용자 설명서

다운로드
페이지 135
93
1
2
3
4
5
6
8
9
10
Cover 
Preliminary Notes and 
Legal Information
Contents: Basic 
Operations
Camera Basics
Creative Shot 
Mode
Auto Mode/ 
Hybrid Auto Mode
Other Shooting 
Modes
Playback Mode
Setting Menu
Accessories
Appendix
Index
Basic Guide
P Mode
7
Advanced Guide
Wi-Fi Functions
Checking Your Wi-Fi Environment
To use Wi-Fi, a Wi-Fi base unit (Wi-Fi router, etc.) that acts as your access 
point must be connected to a computer. Be sure to use a Wi-Fi base unit 
that conforms to the Wi-Fi standard listed in “Specifications” (
If you are already using Wi-Fi, confirm the following items and mark each
one on the Check sheet. For instructions on checking network settings, 
refer to the access point user guide.
If system administrator status is needed to adjust network settings, 
contact the system administrator for details.
These settings are very important for network security. Exercise 
adequate caution when changing these settings.
Check sheet
Network name (SSID/ESSID)
The SSID or ESSID for the access point you use.
Network certificate/data encryption 
(encryption method/encryption mode)
The method for encrypting data during transmission via 
Wi-Fi.
○ None
○ WEP (open system
authentication)
○ WPA-PSK (TKIP)
○ WPA-PSK (AES)
○ WPA2-PSK (TKIP)
○ WPA2-PSK (AES)
Encryption key (network key)
The data encryption key used for transmission via Wi-Fi.
Key index (sent key)
The key specified when using WEP for Network certificate/
data encryption.
○ 1
A router is a device that creates a network (LAN) structure for connecting 
multiple computers. A router that contains an internal Wi-Fi function is called a 
“Wi-Fi router”.
This guide refers to all Wi-Fi routers and base stations as “access points”.
If you use MAC address filtering on your Wi-Fi network, be sure to add the
camera’s MAC address to your access point. You can check your camera’s 
MAC address by choosing the [
3] tab, [Wi-Fi Settings], and then [Check MAC 
Address].
Computer Settings for Connecting via Wi-Fi (Windows 
only)
On a computer running Windows, you must configure the following settings
before you can connect the camera to the computer wirelessly.
Confirm the computer is
connected to Wi-Fi.
z
z
For instructions on checking your network 
connection, refer to the computer user 
manual.
2
 Configure the setting.
z
z
Click in the following order: [Start] menu 
► [All Programs] ► [Canon Utilities] ► 
[CameraWindow] ► [Wi-Fi connection 
setup].
z
z
In the application that opens, follow the 
on-screen instructions and configure the
setting.
COP
Y