Canon EOS40DBODY 사용자 설명서

141

wPrinting

You can crop the image and print only 
the trimmed portion as if the image was 
recomposed. Do the trimming right 
before printing. If you set the trimming 
and then set the print settings, you may 
have to set the trimming again.

 

The image area within the trimming frame will be printed. The shape 
of the trimming frame can be changed with [Paper settings].

When you press the <u> or <I> button, the size of the 
trimming frame will change. The smaller the trimming frame, the 
larger the image magnification will be for the printing.

Use <9> to move the frame over the image vertically or 
horizontally. Move the trimming frame until it shows the desired 
image area or composition.

Each time you press the <B> button, the trimming frame will 
toggle between the vertical and horizontal orientations. This enables 
you to create a vertical-oriented print from a horizontal image.

By turning the <5> dial, you can adjust the angle of the image 
rotation by ±10 degrees in 0.5-degree increments. After rotation, 
<

> will change to blue.

 Press <0> to exit the trimming.

X

The print setting screen will reappear.

 

You can check the trimmed image area on the upper left of the 
print setting screen.