Concord Camera 5062AF 사용자 설명서

12

A

TAKING A PICTURE

 

How to set the flash:
Press      /       repeatedly until the desired indicator appears on the LCD.

Auto Flash (Default) 

The camera judges if a flash is required. If the environment is too dark,  

 

the flash will fire.

    Auto + Red-Eye 

Use this mode to significantly reduce the occurrence of “red-eye” in flash  

 

photography. The camera will automatically detect when the flash is needed  

 

and the flash will fire after a short delay.

Flash ON 

Flash will fire in any lighting condition. The “red-eye” reduction function is  

 

also included.

Flash off 

The flash will not fire in this mode. Please use this mode if you want to  

 

capture the mood of the ambient lighting or to use the available light in  

 

places where flash photography is prohibited, such as museums.

 

•  To prevent blurry pictures in low light situations, hold the camera steady  

 

  when pressing the Shutter button or mount the camera on a tripod.

Note: 
•  The flash needs to recharge after it is fired. If the Shutter button is pressed while the flash is
 

charging, the Flash Ready LED will blink. Please wait a few moments and press the Shutter button 
again to take a picture.

•  Changing the Scene Selection may deactivate the flash setting. Please refer to p.20 for more information.

The AF Assist Light will help to set the focus in low light conditions.
1.   Half press the Shutter button and the AF Assist Light will automatically be on when there is insufficient light.
2.  Fully press the Shutter button to take a picture. (For the details of taking pictures, see page 9.) 

A

3

M

28/45

5

10

30

2

 fig. 1.1

fig. 1.2

fig. 1.3

 

⁄   ⁄ 

 

⁄   ⁄ 

 

⁄   ⁄ 

3

M

28/45

5

10

30

2

DC4062-5062 UG(514173-00)-E   12

5/31/04, 10:00:27 AM