Concord Camera Eye-Q 2133z 사용자 설명서

 

Appendix 2 

 

– Troubleshooting 

era is 

ff.  

Press the power button to turn the camera ON. 

teries are 

ed. 

Inserting Batteries. 

teries are 

Check

Ensure t
Camera

he green 

If the light is flashing, wait until it emits a ste

 Ready LED 

indicator is on and 

sh

ady light 

before taking a picture. The camera may be waiting 
for the flash to charge. 

not fla ing. 

Is the camera 

The c

ed to a 

r? 

connected to a PC. Disconnect the camera to take 
more pictures. 

compute

Setting the Flash. 

h

teries may  If the batteries are too wea

seconds before turning it back on. If this doesn’t
work, replace the batteries. 

subjec
when t
taken

was moving 

e shot was 

pictures. 

The cam
turned o
The bat
discharg

Replace the batteries with fresh ones. Refer to 

The camera 
has no power. 

The bat
inserted incorrectly.

 the battery orientation. Refer to Inserting the 

Batteries. 

The camera 
won’t take a 
picture. 

connect

amera’s buttons are not functional when 

Is the flash on? 

Ensure the flash is set to auto or always on. Refer to 

The flash 
doesn’t work. 

T e bat
be weak. 

k, the flash will be unable 

to recharge. Turn the camera off and wait a few 

 

The images 
are blurry. 

The camera or 

t 

h

. 

Hold the camera steady or put it on a tripod to take 

The computer 
does not 
recognize the 
camera  

The camera was 
connected to a 
personal computer 
by USB before 
installing software.

Connect the camera to the computer with the USB 
cable. Select [My computer] > [Control panel] > 
[System] > [Device manager]. From [other devices] 
delete [Composite USB device] or [unknown device]. 
Disconnect the camera from the computer, install the 
software, and then reconnect the camera.