Zebra Technologies radio frequency identification (rfid) 사용자 설명서
89
ZPL II Commands for RFID
^MM
11/14/2008
RFID Programming Guide
58978L-008 Rev. A
^MM
Print Mode
Description The
^MM
command determines the action the printer takes after a label or
group of labels has printed.
Format ^MMa,b
This table identifies the parameters for this format:
This list identifies the different modes of operation:
• Tear-off — after printing, the label advances so the web is over the tear bar. The label,
with liner attached, can be torn off manually.
Parameters
Details
a
=
desired mode
Accepted Values:
T
=
Tear-off
P
=
Peel-off (not available on S-300)
R
=
Rewind (depends on printer model)
A
=
Applicator (depends on printer model)
C
=
Cutter (depends on printer model)
D
=
Delayed cutter (depends on printer model)
F =
RFID (not valid on the RP4T)
Default Value:
The values available for parameter
a
depend on the
printer being used and whether it supports the option.
For supported RFID printers, the defaults are as follows:
A =
R110PAX4 print engines
F =
other RFID printers
b
=
prepeel select
Accepted Values:
N =
no
Y =
yes
Default Value:
N
The command is ignored if parameters are missing or
invalid. The current value of the command remains
unchanged.
invalid. The current value of the command remains
unchanged.