Kodak 100 PLUS 사용자 설명서
7-2
A-61588 July 2008
Following is a listing of error codes that may be displayed in the Display
window. When an error is indicated, the LED indicator light will blink red
the same number of times as the number displayed in the Display
window, alternating along with the letter “E”. Therefore, if the Scan
Station cover is open, the number “6” and an “E” will alternate in the
Display window and the indicator will flash red and blink six times.
window. When an error is indicated, the LED indicator light will blink red
the same number of times as the number displayed in the Display
window, alternating along with the letter “E”. Therefore, if the Scan
Station cover is open, the number “6” and an “E” will alternate in the
Display window and the indicator will flash red and blink six times.
1 - 5, 7 and 8
Call Service.
6
The cover is open.
9
There is a document jam.
If no action is taken, the flashing sequence will eventually stop and the
Display window will display the error number with a steady red LED. To
clear this, correct the error (e.g., clear a document jam) or power down
the Scan Station completely, and turn the Scan Station back on. If the
situation persists, contact Kodak Service.
Display window will display the error number with a steady red LED. To
clear this, correct the error (e.g., clear a document jam) or power down
the Scan Station completely, and turn the Scan Station back on. If the
situation persists, contact Kodak Service.
Clearing a document
jam
jam
If your Scan Station stops scanning due to a document jam, follow the
procedures below:
procedures below:
1. Open the Scan Station cover.
2. Remove any jammed documents from inside the Scan Station.
3. Close the cover.