Nikon 5000ED 사용자 설명서

2 

Insert the FH-3
The direction of insertion depends on which of the two 
apertures in the metal cover contains the frame to be 
scanned; refer to the illustration below (arrows indicate 
direction of insertion).  Slide the holder in until it stops.

1 

Insert the MA-21 slide-mount adapter
After confi rming that the status LED is not blinking, slide 
the MA-21 slide-mount adapter into the adapter slot 
(

 25).  When the adapter is fully inserted, the status 

LED will blink while the scanner initializes (

 24).  Wait 

until the status LED stops blinking.

To scan frames 1–3, insert the left end of 
the holder into the scanner.

To scan frames 4–6, insert the right end of 
the holder into the scanner.

Third frame 
scanned (frame 
“C”).

Second 
frame scanned 
(frame “B”).

First frame 
scanned (frame 
“A”).

After confi rming that the status LED is not blinking, remove 
the FH-3 by hand.  The eject button on the MA-21 can not 
be used when removing the FH-3.

Remove the FH-3 after use.  Errors may occur if the FH-3 is in place when the scanner is turned on.  If an 
error occurs, turn the scanner off and then on again after removing the FH-3.

Fifth frame scanned 
(frame “E”).

Fourth frame scanned 
(frame “D”).

Sixth frame scanned 
(frame “F”).