Lexmark 1500 Series 사용자 설명서
![Lexmark](https://files.manualsbrain.com/attachments/878cae5fca737841ce37f41a7ee73881a8b54f60/common/fit/150/50/823435a5b9c868f91a4b7f8b99ddfd9b9c699edf1f6ff104003e82a92d7f/brand_logo.png)
Note: The computer recognizes one active media device at a time from your printer. If you insert a memory card
and a flash drive, a message appears on the display prompting you to designate the device you want the printer to
recognize.
and a flash drive, a message appears on the display prompting you to designate the device you want the printer to
recognize.
Connecting a PictBridge-enabled digital camera
PictBridge is a technology available in most digital cameras that lets you print directly from your digital camera without
using a computer. You can connect a PictBridge-enabled digital camera to the printer, and use the buttons on the
camera to control and print photos.
using a computer. You can connect a PictBridge-enabled digital camera to the printer, and use the buttons on the
camera to control and print photos.
1
Insert one end of the USB cable into the camera.
Note: Use only the USB cable that came with your camera.
2
Insert the other end of the cable into the PictBridge port on the front of the printer.
Notes:
•
Make sure the PictBridge-enabled digital camera is set to the correct USB mode. For more information, see
the documentation that came with your camera.
the documentation that came with your camera.
•
The printer recognizes one active media device at a time. Remove any memory cards from the printer when
you connect the camera.
you connect the camera.
3
If the PictBridge connection is successful, the camera automatically switches to print mode, the
PictBridge symbol appears on the camera display, or a message recognizing the connection appears on the
camera display, depending on your camera.
PictBridge symbol appears on the camera display, or a message recognizing the connection appears on the
camera display, depending on your camera.
For more information, see the documentation that came with your camera.
Transferring all photos from a memory card using the computer
1
Insert a memory card into the printer with the label facing the printer control panel. If the computer is connected
to a wireless network, you will need to select the printer.
to a wireless network, you will need to select the printer.
Note: For a network connection, you must manually open the application and select the printer you want to use.
The Productivity Studio software launches automatically on your computer.
2
Click Automatically save all photos to “My Pictures”.
3
If you want to erase the photos from the memory card, click Yes.
Note: Make sure all the photos have been copied before you click Yes to erase.
4
Click Done. Remove the memory card to view your transferred photos in the Library.
45