Sony C4200 사용자 설명서
Memory card troubleshooting
Use this section to solve these memory card problems:
•
•
•
•
My memory card no longer works in my digital camera
Cause: You formatted the card on a Windows XP computer. By default, Windows
XP will format a memory card of 8 MB or less and 64 MB or more with the FAT32
format. Digital cameras and other devices use the FAT (FAT16 or FAT12) format and
cannot recognize a FAT32 formatted card.
XP will format a memory card of 8 MB or less and 64 MB or more with the FAT32
format. Digital cameras and other devices use the FAT (FAT16 or FAT12) format and
cannot recognize a FAT32 formatted card.
Solution: Reformat your memory card in your camera or format your memory card
in a Windows XP computer by selecting the FAT format.
in a Windows XP computer by selecting the FAT format.
The HP All-in-One does not read the memory card
Cause: The card is inserted backwards or upside down.
Solution: Turn the memory card so that the label faces up and the contacts are
facing the HP All-in-One, and then push the card forward into the appropriate slot until
the Photo light turns on.
If the memory card is not inserted properly, the HP All-in-One will not respond and
the green Photo light (near the memory card slots) will blink rapidly.
After the memory card has been inserted properly, the Photo light will blink green for
a few seconds, and then remain lit.
Solution: Turn the memory card so that the label faces up and the contacts are
facing the HP All-in-One, and then push the card forward into the appropriate slot until
the Photo light turns on.
If the memory card is not inserted properly, the HP All-in-One will not respond and
the green Photo light (near the memory card slots) will blink rapidly.
After the memory card has been inserted properly, the Photo light will blink green for
a few seconds, and then remain lit.
Cause: The card is not fully inserted.
Solution: Make sure you fully insert the memory card into the appropriate slot on
the HP All-in-One.
If the memory card is not inserted properly, the HP All-in-One will not respond and
the green Photo light (near the memory card slots) will blink rapidly.
After the memory card has been inserted properly, the Photo light will blink green for
a few seconds, and then remain lit.
Solution: Make sure you fully insert the memory card into the appropriate slot on
the HP All-in-One.
If the memory card is not inserted properly, the HP All-in-One will not respond and
the green Photo light (near the memory card slots) will blink rapidly.
After the memory card has been inserted properly, the Photo light will blink green for
a few seconds, and then remain lit.
Cause: Multiple memory cards are inserted in the HP All-in-One.
Solution: You can insert only one memory card at a time.
If more than one memory card is inserted, the green Photo light (near the memory
card slots) will blink rapidly, and an error message will appear on the computer screen.
Remove the additional memory card to resolve the problem.
Solution: You can insert only one memory card at a time.
If more than one memory card is inserted, the green Photo light (near the memory
card slots) will blink rapidly, and an error message will appear on the computer screen.
Remove the additional memory card to resolve the problem.
Cause: The file system is corrupted.
Chapter 13
112
Troubleshooting
T
roub
les
hoot
les
hoot
ing