Kodak 300 사용자 설명서

22

Printing stops 
during mid-print
(paper stops 
feeding, and 
Paper light and 
On/Off light may 
blink)

IMPORTANT: 

■

Check the paper:

Remove the paper tray (

).

Check the paper slot on the back of the photo printer.

Remove loose paper from the photo printer. If paper is jammed, see 

Inspect the paper supply: make sure removable tabs have not been 
detached from the paper. Reload with new paper if necessary.

Carefully "fan" the paper to keep the sheets from sticking together.

Reload the paper tray. Do not exceed the fill line.

Re-install the paper tray, then press 

 to resume printing.

Print is smudged

■

Fingerprints may be on glossy side of paper. Handle paper by the edges 
or by the removable tabs (

Print is spotted 

■

Check to see if the paper is dirty, and use a dry, lint-free cloth to wipe the 
paper clean. For excessive dirt or debris, thoroughly clean the paper tray, 
and load new paper (

). Check and clean the paper feed roller if 

).

NOTE:  When storing paper, do not remove paper that is in the paper tray. Instead, remove the 

paper tray itself, then close the paper tray cover and paper tray door to keep out dust 
and debris.