JVC GY-HM700CHE 사용자 설명서

Use the operation buttons on the side control panel of the
camera recorder to play back.

Select the clip to play back with the cross-shaped button.

Playback of the selected clip starts.

䡵Time Code Playback

Time code or user’s bit recorded on an SDHC card can be 
displayed on the LCD monitor and viewfinder.

● When [HD/SD-SDI Out] in the [A/V Out] menu is set to AHD-

SDI

B or ASD-SDIB, time code is also output from the [HD/

SD-SDI] output terminal. (

● User’s bit output from the [HD/SD-SDI] output terminal is 

used as a flag to determine valid video signals. Therefore, 
accurate values will not be output.

● If a section without time code is played back, the time code 

will stop. However, playback will continue.

Press the [MENU] button during thumbnail display to display 
the thumbnail menu.
Press the [MENU] button during menu display to cancel the 
settings and exit the menu.

A

 Button

Plays back/pauses the selected clip.

B

 Button

Skips in the reverse or forward 
direction.

 Button

Fast forwards in the reverse or forward 
direction.

C

 Button

Stops playback.

A

B

C

Displays the information screen of the SDHC 
card.

For selecting the display method of the 
thumbnail screen.
If a check is selected, the thumbnail screen will 
be displayed as [Detailed Properties (4x1 
Thumbnail) Screen]. (

For selecting the display method for the 
thumbnail text on the thumbnail screen.

Displays the recording start time code at the 
thumbnail text display area (below the 
thumbnail).

Displays the recording start date/time at the 
thumbnail text display area (below the 
thumbnail).

For deleting clips. (

Deletes the selected clip.

Deletes all clips that are displayed.

Opens the [Main Menu] screen. (

Exits and closes the menu.

Thumbnail Menu

Sub-Menu

Thumbnail Menu Screen