JVC GY-HM700CHU 사용자 설명서

Playback images on the camera recorder can be stream 
output during editing using a non-linear editing system.

䡵Loading to a Non-linear Editing System 
in Play Mode

A

Set the [HD/DV] IEEE1394 terminal mode switch to 
ADVB.

B

Set the [INT/EXT] IEEE1394 interface terminal switch to 
AEXTB.

● Stream transmission is only possible for DV format images.

Press the [CAM/MEDIA] selection button to switch to Media 
mode. (

● Start recording only after ensuring that the devices are 

properly connected.

Playback starts.

For details, refer to the instruction manual of the non-linear 
editing system.

After loading is complete, press the [CANCEL] button on the 
camera recorder to stop playback.

● Switch the [HD/DV] IEEE1394 terminal mode switch only 

after turning OFF the power of the camera recorder.

● The operating procedures vary depending on the 

characteristics and specifications of the connected devices, 
and transfer of data may fail even when the devices are 
properly connected.

● If noise appears on the screen or audio sound is interrupted, 

reconnect the IEEE1394 cable or turn on the power of the 
camera recorder again.

● Noise may occur in the audio when you turn ON/OFF the 

power of the device connected to the [IEEE1394] terminal. 
Before performing any of these operations, lower the volume 
of the device connected to the camera recorder to the 

minimum.

Camera recorder

: Recorded SDHC card

IEEE1394

Cable

Signal Flow

[HD/DV] IEEE 1394 
Terminal Mode 
Switch

[IEEE1394] Terminal

PC

[INT/EXT] IEEE1394

Interface Terminal

Switch