Panasonic SDR-H95 사용자 설명서
35
VQT2N91
This unit will resume recording pause mode
about 0.8 seconds after the LCD monitor is
reopened.
≥ Start time will not shorten if there is no SD
about 0.8 seconds after the LCD monitor is
reopened.
≥ Start time will not shorten if there is no SD
card inserted.
/
Start time will be shorten if the [Built-
inMemory] is selected in the [MEDIA
SELECT], even if there is no SD card
inserted.
inMemory] is selected in the [MEDIA
SELECT], even if there is no SD card
inserted.
/
Start time will be shorten if the [HDD] is
selected in the [MEDIA SELECT], even if
there is no SD card inserted.
selected in the [MEDIA SELECT], even if
there is no SD card inserted.
¬ Change the mode to
.
1
Select the menu. (l 23)
2
Close the LCD monitor while
the mode is set to
the mode is set to
.
The status indicator A flashes green and the
unit goes into quick start standby mode.
unit goes into quick start standby mode.
3
Open the LCD monitor.
The status indicator A lights red and the unit
is put into recording pause.
is put into recording pause.
≥ When in quick start standby mode
about 70% of the power used in
recording pause mode is being
consumed, so the recording time will
be reduced.
recording pause mode is being
consumed, so the recording time will
be reduced.
≥ Quick start standby mode is cancelled if
j about 5 minutes elapsed
j mode is set to
j mode is set to
≥ It may take some time for automatic white
balance to adjust.
≥ In the quick start mode, the zoom
magnification becomes 1k.
≥ If [ECONOMY] (
l 25) is set to
[5 MINUTES] and the unit automatically
goes into quick start standby mode, close
the LCD monitor and then open it again.
goes into quick start standby mode, close
the LCD monitor and then open it again.
≥ Turn the unit off using the power button.
When the power is turned on with the mode
set to
set to
, the unit will enter the recording
pause mode after about 1.9 seconds.
Select the menu. (l 23)
≥ In the quick power on mode, the zoom
magnification becomes 1k.
Quick start
[SETUP]
# [QUICK START] # [ON]
SDR-T55
SDR-T50
SDR-H95
SDR-H85
Quick power on
[SETUP]
# [QUICK POWER ON] #
[ON]