Panasonic HXWA03H 사용자 설명서
- 49 -
∫ About the focusing area
≥ When [FOCUS MODE] (
) is set to
(9-PT AUTOFOCUS),
(focusing
area
A) is displayed at the position where
focus is achieved.
The unit automatically determines the
position where focus is achieved from nine
focus points within the recording area. If the
focusing area doesn’t appear in a desired position, try adjusting the
camera angle etc., and focus again.
When focus is achieved over a wide range at the center of the screen,
a large focusing area is displayed.
The unit automatically determines the
position where focus is achieved from nine
focus points within the recording area. If the
focusing area doesn’t appear in a desired position, try adjusting the
camera angle etc., and focus again.
When focus is achieved over a wide range at the center of the screen,
a large focusing area is displayed.
≥ When [FOCUS MODE] (
) is set to [SPOT FOCUS], the unit can
focus on the subject in the center of the recording area.
≥ When the risk of jitter increases due to a slower shutter speed while
recording still picture,
(camera shake icon) will appear on the LCD
monitor. When this occurs, attach the unit to a tripod to prevent jitter
while recording or set [FLASH] to
while recording or set [FLASH] to
ßA (AUTO). (
≥ When recording in a dark environment, writing to the SD card may take
time.
≥ To print a picture, save the picture to the SD card (
) and print
using a PC or a printer.
≥ The edges of still pictures recorded on this unit with a 16:9 aspect ratio
may be cut at printing. Check the printer or photo studio before
printing.
printing.
≥ Please refer to page
for details about the number of recordable
pictures.
16
16
M
16
M