Panasonic SDR-S26 사용자 설명서

다운로드
페이지 104
68
LSQT1522
Playback
With other 
products
3
With other video devices
≥ Use the AC adaptor to free you from worrying 
about the battery running down.
1
Connect this unit to a video 
device.
2
Turn on this unit, then rotate the 
mode dial to select 
.
3
Start playback on this unit.
Then start recording on the 
connected device.
To stop dubbing
Stop recording on the connected device.
Then stop playback on this unit.
∫ Using SD card slot or USB 
terminal of other video devices
If you have a DVD recorder with an SD card slot 
or a USB terminal, images recorded by this unit 
can be dubbed onto the hard disk or a DVD disc.
Refer to the operating instructions of your DVD 
recorder for information about whether or not it 
supports dubbing from an SD card or a USB 
terminal.
When using a USB terminal
Connect this unit to a DVD recorder with the USB 
cable (supplied), then select [PC/RECORDER] 
on the USB function selection screen.
≥ For details on how to dub the images, refer to 
the operating instructions of the DVD recorder.
Dubbing images onto other 
video devices
A AV cable (supplied)
≥ Insert the plugs as far as they will go.
≥ Do not use any other AV cables except 
the supplied one.
≥ Select the video input on the video 
device and TV that this unit and the 
video device are connected to.
VIDEO IN
AUDIO IN
If you dub images and then play them back on 
a wide-screen TV, they may be squeezed 
horizontally. In this case, refer to the operating 
instructions of the device you are dubbing to 
or read the operating instructions of the wide-
screen TV and set the aspect setting to 16:9 
(Full).
SDR-S26GN-LSQT1522_mst.book  68 ページ  2009年1月6日 火曜日 午後6時59分