Panasonic VDR-D220GN 사용자 설명서
74
LSQT1161
Disc and card management
(-RW‹V›)
¬Rotate the mode dial to select
.
1
Press the MENU button, then
select [DISC SETUP]
select [DISC SETUP]
#
[UN-FINALIZE]
# [YES] and
press the joystick.
2
When the confirmation message
appears, select [YES], then press
the joystick.
appears, select [YES], then press
the joystick.
≥ When un-finalizing is complete, press the
MENU button to exit the message screen.
≥ DVD-RW (VR format) cannot be un-finalized.
DVD-RW (VR format) after finalization can be
recorded and edited in the same way as DVD-
RW (VR format) before finalization.
recorded and edited in the same way as DVD-
RW (VR format) before finalization.
≥ DVD-R cannot be un-finalized.
≥ When you un-finalize the disc, use a battery
≥ When you un-finalize the disc, use a battery
with sufficient battery power or the AC adaptor.
(RAM) (-RW‹VR›)
This is for preventing recorded contents from
being deleted or edited by mistake.
Further recording and editing is not possible on
protected discs until the protection is released.
being deleted or edited by mistake.
Further recording and editing is not possible on
protected discs until the protection is released.
¬Rotate the mode dial to select
.
1
Press the MENU button, then
select [DISC SETUP]
select [DISC SETUP]
#
[DISC PROTECT] and press the
joystick.
joystick.
2
When the confirmation message
appears, select [YES], then press
the joystick.
appears, select [YES], then press
the joystick.
To release disc protection
1) Press the MENU button, then select
[DISC SETUP]
# [DISC PROTECT] and
press the joystick.
2) When the confirmation message appears,
select [YES], then press the joystick.
≥ If the disc has been protected on another device,
it may not be possible to release the protection on
this unit. In this case, release the protection on the
device that you used to protect it.
this unit. In this case, release the protection on the
device that you used to protect it.
(RAM) (-RW‹VR›) (-RW‹V›)
Please be aware that if a disc is formatted, then
all the data recorded on the disc will be erased.
all the data recorded on the disc will be erased.
¬Rotate the mode dial to select
or
.
1
Press the MENU button, then
select [DISC SETUP]
select [DISC SETUP]
#
[FORMAT DISC]
# [YES] and
press the joystick.
Un-finalizing a DVD-RW
This is for un-finalizing a DVD-RW
(Video format) so that it can be used
for recording.
(Video format) so that it can be used
for recording.
Protecting a disc
MENU
Formatting discs
This is for initializing discs.
MENU
MENU
LSQT1161_GN.book 74 ページ ２００７年１月１９日 金曜日 午後１時８分