Panasonic VQT3R48 사용자 설명서
Others
- 178 -
[MOTION RECORDING WAS CANCELLED DUE TO THE LIMITATION OF THE
WRITING SPEED OF THE CARD]
WRITING SPEED OF THE CARD]
•
Use a card with SD Speed Class with “Class 4” or higher when recording motion pictures.
•
In the event that it stops even after using a “Class 4” card or higher, the data writing speed has
deteriorated so it is recommended to make a backup and then format
deteriorated so it is recommended to make a backup and then format
•
Depending on the type of the card, motion picture recording may stop in the middle.
[CANNOT RECORD DUE TO INCOMPATIBLE FORMAT(NTSC/PAL) DATA ON THIS
CARD.]
CARD.]
> If you want to delete some pictures, format the card after saving necessary data on a PC
etc.
> Insert a different card.
[A FOLDER CANNOT BE CREATED]
•
A folder cannot be created because there are no remaining folder numbers that can be used.
If you execute
[NO.RESET] in the [SETUP] menu after formatting, the folder number is reset to 100.
[PICTURE IS DISPLAYED FOR 16:9 TV]/[PICTURE IS DISPLAYED FOR 4:3 TV]
•
Select [TV ASPECT] in the [SETUP] menu if you want to change the TV aspect.
•
This message also appears when the USB connection cable is connected to the camera only.
In this case, connect the other end of the USB connection cable to a PC or a printer.
In this case, connect the other end of the USB connection cable to a PC or a printer.
[Recording failed.]
•
You may not record when the recording location is too dark/too bright, or if the subject does
not have enough contrast when recording in 3D.
not have enough contrast when recording in 3D.
[THIS BATTERY CANNOT BE USED]
•
Use a genuine Panasonic battery. If this message is displayed even when a genuine
Panasonic battery is used, contact the dealer or your nearest Service Center.
Panasonic battery is used, contact the dealer or your nearest Service Center.
•
If the battery terminal is dirty, clean it and remove any objects.