Panasonic GR-DX300 사용자 설명서
EN
33
USING MENUS FOR DETAILED ADJUSTMENT
ON
I S
D
–
RETURN
OF F
I ND CUT
W
–
OF F
I DE MODE
W
–
0
ADJ . –
AUTO
LASH
F
LASH
F
–
OF F
ELE MACRO
T
–
OF F
EL F - T I MER
S
–
OF F
S
5
–
N
A
M
UAL
SNAP MODE
Refer to “Snapshot (For Tape Recording)” (
墌
pg. 29).
GAIN UP
OFF: Allows you to shoot dark scenes with no picture
brightness adjustment.
brightness adjustment.
[AGC]: The overall appearance may be grainy, but the
image is bright.
image is bright.
AUTO
: The shutter speed is automatically
adjusted (1/25 — 1/200 sec.). Shooting a subject in
low or poor lighting at 1/25 sec. shutter speed
provides a brighter image than in the AGC mode, but
the subject’s movements are not smooth or natural.
The overall appearance may be grainy. While the
shutter speed is being automatically adjusted, “
low or poor lighting at 1/25 sec. shutter speed
provides a brighter image than in the AGC mode, but
the subject’s movements are not smooth or natural.
The overall appearance may be grainy. While the
shutter speed is being automatically adjusted, “
”
is displayed.
NAVIGATION
Refer to “NAVIGATION Function” (
墌
pg. 21, 22).
MANUAL
The “
MANUAL” settings are effective only when the
Power Switch
@
is set to “
”.
DIS
OFF: To turn off this function.
[ON
]: To compensate for unstable images caused
by camera-shake, particularly at high magnification.
NOTES:
● Accurate stabilisation may not be possible if hand shake
is excessive, or under the following conditions:
• When shooting subjects with vertical or horizontal
• When shooting subjects with vertical or horizontal
stripes.
• When shooting dark or dim subjects.
• When shooting subjects with excessive backlighting.
• When shooting scenes with movement in various
• When shooting subjects with excessive backlighting.
• When shooting scenes with movement in various
directions.
• When shooting scenes with low-contrast backgrounds.
● Switch off this mode when recording with the camcorder
on a tripod.
● The “
” indicator
#
blinks or goes out if the Stabiliser
cannot be used.
SELF-TIMER
Refer to “Self-Timer” (
墌
pg. 26).
5S
[OFF], 5S: Refer to “5-Seconnd Recording”
(
(
墌
pg. 26).
Anim.: Allows you to record a few frames only. By
using an inanimate object and changing its position
between shots, you can record the subject as though
it is moving (
using an inanimate object and changing its position
between shots, you can record the subject as though
it is moving (
墌
pg. 26).
TELE MACRO
[OFF]: To turn off this function.
ON: Usually the distance to a subject where the lens
is in focus depends on the zoom magnification.
Unless there is a distance more than 1m to the
subject, the lens is out of focus at the maximum
telephoto setting. When set to “ON”, you can shoot a
subject as large as possible at a distance of approx.
60 cm.
is in focus depends on the zoom magnification.
Unless there is a distance more than 1m to the
subject, the lens is out of focus at the maximum
telephoto setting. When set to “ON”, you can shoot a
subject as large as possible at a distance of approx.
60 cm.
• Depending on the zoom position, the lens may go
out of focus.
WIDE MODE
[OFF]: Records with no change in the screen ratio.
For playback on a TV with a normal screen ratio.
For playback on a TV with a normal screen ratio.
CINEMA
: Inserts black bands at the top and
bottom of the screen. During playback on
wide-screen TVs, the black bands at the top and
bottom of the screen are cut and the screen ratio
becomes 16:9.
wide-screen TVs, the black bands at the top and
bottom of the screen are cut and the screen ratio
becomes 16:9.
3
appears. When using this
mode, refer to your wide-screen TV’s instruction
manual. During playback/recording on 4:3 TVs/LCD
monitor/viewfinder, black bands are inserted at the
top and bottom of the screen and the image appears
like a letterboxed 16:9 movie.
manual. During playback/recording on 4:3 TVs/LCD
monitor/viewfinder, black bands are inserted at the
top and bottom of the screen and the image appears
like a letterboxed 16:9 movie.
• The “CINEMA” mode is effective only when the
VIDEO/MEMORY Switch
t
is set to “VIDEO”.
SQUEEZE
: For playback on TVs with an aspect
ratio of 16:9. Naturally expands the image to fit the
screen without distortion.
screen without distortion.
3
appears. When
using this mode, refer to your wide-screen TV’s
instruction manual. During playback/recording on 4:3
TVs/LCD monitor/viewfinder, the image is elongated
vertically.
instruction manual. During playback/recording on 4:3
TVs/LCD monitor/viewfinder, the image is elongated
vertically.
• The “SQUEEZE” mode is effective only when the
VIDEO/MEMORY Switch
t
is set to “VIDEO”.
D.WIDE
(GR-DX300/DX100 only):
3
appears. The zoom range is extended beyond the
maximum optical zoom wide angle range. This
mode’s wide angle setting is equivalent to using a
0.7X wide conversion lens. Zooming is possible from
0.7X to 10X. This mode is suitable for shooting in a
small room.
maximum optical zoom wide angle range. This
mode’s wide angle setting is equivalent to using a
0.7X wide conversion lens. Zooming is possible from
0.7X to 10X. This mode is suitable for shooting in a
small room.
• The “D.WIDE” mode is effective only when the
VIDEO/MEMORY
t
Switch is set to “VIDEO”.
WIND CUT
[OFF]: Disengages the function which cuts down on
noise created by wind.
noise created by wind.
ON
: Helps cut down on noise created by wind.
“
”
9
appears. The quality of the sound will
change. This is normal.
FLASH
Refer to “Snapshot Flash” (
墌
pg. 25).
FLASH ADJ.
Refer to “Flash Brightness Adjustment” (
墌
pg. 25).
[ ] = Factory-preset
(GR-DX300/DX100 only)
(GR-DX300/DX100 only)
01 DX300/100/95/75EK_EN 25-34
2/26/03, 7:13 PM
33